Jwin Portable CD Player JX CD5500 User Manual

R
77-20MS90M01520(English)  
 
INSTALLATION  
INSTALLATION (Wall Mounting)  
PEDESTAL INSTALLATION  
Position the bracket (supplied) on the wall (as show below) where you want to hang the  
center unit. Drill 2 holes slightly undersized for a firm fit.  
Secure the bracket on the wall using 2 dowels and 2 screws (supplied)  
The mounting screws are to be anchored into solid wall support, such as wood frame or  
concrete wall.  
1. Set the unit on the pedestal (1).  
2. To fix the insert, then fix it by 2 pcs screws as (2).  
Mount the center unit onto the wall bracket.  
Make sure the mounting tab on the center unit fits securely into the mounting slot on the  
wall bracket.  
Screws and plastic dowels are also provided for speakers if they are to be wall-mounted  
away from the center section.  
2
1
PLACE AND FIX THE SPEAKER  
2
Insert the speaker stud into the hole  
of the main unit as (1).  
Push the speaker down to the end  
until click sound is heard to confirm  
fixed as (2).  
1
1
1
2
1
DISASSEMBLE THE SPEAKER  
1
Pushing the speaker up from the  
back side as (1).  
Release the speaker from the main  
unit speaker holder as (2).  
2
2
2
1
2
3
4
 
LOCATION OF CONTROLS  
REMOTE CONTROL  
TOP VIEW  
1
2
3
4
5
6
28. FOLDER DN/MEM-DN Button  
29. CD STOP/BAND Button  
30. PLAY MODE Button  
31. POWER Button  
31  
32  
1. POWER Button  
2. EQ Button  
3. FUNCTION Button  
4. CD Door Open/Close Button  
5. FOLDER DOWN/MEM. DOWN Button  
6. FOLDER UP/MEM. UP Button  
32. FUNCTION Button  
33. TUNING/CD SKIP  
34. PROGRAM Button  
33  
34  
35  
/
Buttons  
30  
35.  
CD PLAY/PAUSE Button  
29  
28  
36. FOLDER UP/MEM-UP Button  
37. VOLUME UP/DOWN Button  
FRONT VIEW  
36  
7
8
9
10 11  
7. REMOTE Sensor  
8. CD Door  
37  
9. STANDBY Indicator  
10. PLAY MODE Button  
11. STOP/BAND Button  
12. CD/TUNER LCD Display  
13. PLAY/PAUSE Button  
14. VOLUME UP/DOWN Button  
15. TUNING/CD SKIP UP/Next and DN/Back Button  
16. PROGRAM Button  
12  
13  
14  
17. PEDESTAL  
15  
16  
REAR VIEW  
BATTERY REPLACEMENT  
17  
18. SPEAKER Terminal  
19. AC Input Socket  
20. SUBWOOFER Jack  
To connect with external sub-woofer speaker  
(not included)  
21. HEADPHONE Jack (3.5mm)  
22. FM Antenna  
1. Remove the battery compartment cover.  
2. Insert two "AA" size / LR6 / UM-3  
batteries into the battery compartment  
and ensure the proper polarities are  
maintained.  
2
1
3. Replace the battery compartment cover.  
23. AUX Socket (R)  
24. AUX Socket (L)  
Battery Life  
27  
26  
25. BATTERY Door/Compartment  
26. RESET Switch - If the set locked up, or does  
not display information, or the data appearing  
are wrong, press the “RESET” switch with a  
sharp object, e.g. needle etc. The data must  
then be re-entered.  
Note: Tuner memory would be lost when  
“RESET” switch pressed.  
27. FM STEREO/MONO Switch  
To prevent damage due to batteries  
leaking, the remote should be checked  
periodically as required.  
Damage due to battery leakage is not  
covered by the warranty.  
When the battery becomes weak, the  
remote control will not work, be sure to  
replace both batteries at the same time. We  
recommend ALKALINE batteries for longer  
usable life.  
3
25  
24  
23  
22  
OPEN  
18  
19  
Headphone Jack  
21 20  
Headphone Jack “PHONES” (21) for headphones with 16-32 Ohm  
impedance (3.5mm jack). Use corresponding adaptors (Electronics  
shops) if you have different plugs. The speakers are automatically  
switched off when the headphones are being used.  
CAUTION:  
Listening at high power for long hours can damage users’ ears.  
5
6
 
STORING PRESET STATIONS  
LISTENING TO THE RADIO  
OPERATING INSTRUCTION  
1.  
Tune to the station you wish to store by  
pressing TUNING UP or DOWN button (15) or  
(33).  
1.  
Press the POWER button (1) or (31) to turn on  
the unit then press the FUNCTION button (3) or  
(32) to select RADIO mode.  
POWER ON/OFF  
1. Connect the AC cord, make sure the voltage is correct and  
then press the POWER button (1) or (31) to turn on the unit.  
POWER  
FUNCTION  
FUNCTION  
2. Press the FUNCTION button (3) or (32) to select your desired  
mode (CD/AUX/TUNER).  
2.  
Press the STOP/BAND button (11) or (29) for  
AM or FM band.  
Example : FM mode  
The unit enables you to program 10 stations of FM  
and 10 stations of AM band.  
2. Press the PROGRAM button (16) or (34).  
(“MEM” flashing)  
POWER  
3. Press the POWER button (1) or (31) to turn off the unit.  
3. Press the TUNING Up or Down button (15) or  
(33) to tune to the desired station.  
BASIC OPERATION  
Volume Control  
3. Press the FOLDER UP or FOLDER DOWN  
button (5)/(6) or (28)/(36) repeatedly to set the  
desired preset station number. (“MEM” still  
flashing)  
Once the required mode has been located, adjust the VOLUME  
button (14) or (37) up or down to the desired level.  
Preset Equalization  
Manual Tuning - Press and hold the TUNING  
UP or DOWN buttons (15) or (33) until the  
display approaches your desired station. Then  
tap the buttons repeatedly until the display  
shows the exact frequency.  
Auto tuning - Press the TUNING UP or DOWN  
buttons momentarily and release. The tuner will  
move up or down to the next available station.  
EQ  
To select desired sound effect, press the EQ button (2) repeatedly  
to cycle through the preset EQ show on the display — CLA  
(Classic), ROCK, POP.  
4.  
Press the PROGRAM button (16) or (34). The  
station is stored. (“MEM” steady on)  
FM Stereo/Mono  
Slide the FM Stereo/Mono switch (27) to choose between FM stereo  
(2-channel) reception or FM mono (1-channel) reception. If the FM  
stereo reception is too noisy, choose the FM mono reception setting  
instead.  
4. When finished listening, press the POWER  
button (1) or (31) to turn off the unit.  
AUX Operation  
To listen to audio signals from an external unit through this unit.  
1. Connect the right (23) and left (24) plugs from the auxiliary unit.  
2. Press the FUNCTION button (3) or (32) select to AUX mode.  
3. Operate the auxiliary unit by following it’s owners manual.  
5.  
To store other stations, repeat above steps.  
RECALLING PRESET STATION  
Press the FOLDER UP or FOLDER DOWN  
button (5)/(6) or (28)/(36) on main unit or  
remote control repeatedly to select the desired  
station.  
7
8
 
Skip and Search Function  
PLAYING COMPACT DISCS  
To play the disc  
Press the SKIP Next or Back buttons (15) or (33) briefly.  
Press the PLAY/PAUSE button (13) or (35) to play  
the CD.  
1.  
Press the POWER button (1) or (31) turn on  
the unit then press the FUNCTION button (3) or  
(32) to select CD mode.  
FUNCTION  
IN PLAY MODE  
IN STOP MODE  
PRESS ONCE  
PRESS ONCE  
PRESS TWICE  
Playing track 1  
B A C K T O T H E  
BEGINNING OF  
THE CURRENT  
TRACK  
PREVIOUS  
TRACK  
PREVIOUS  
TRACK  
If there is no CD inside or disc damaged, a  
"- - -" display will appear.  
2.  
NEXT TRACK  
NEXT TRACK  
When there is no disc  
Press and hold the SKIP button during playback :  
: FAST BACKWARD  
NOTE : During search mode low level audio will be heard to assist in locating the  
correct point in the track.  
: FAST FORWARD  
To pause the CD  
Press the PLAY/PAUSE button while the disc is  
playing. Press it again to resume playing.  
To repeat a track or disc  
Press the PLAY MODE button (10) or (30) one time,  
"one track repeat" will be active.(“REP” flashes)  
Loading a disc  
One track repeat (flashing)  
1. Press the CD door Open button (4) to open the  
CD door.  
While paused  
2.  
Put a disc inside and then close the CD door.  
After that, reading disc will start.  
Note: Ensure the disc is pushed fully and  
locked in place.  
With one more press, "all track repeat" will be active.  
(“REP A” will show steadily)  
All track repeat (steady)  
With one additional press, the repeat mode is cancelled.  
After reading disc  
To stop the disc  
Press the STOP button (11) or (29).  
Note: This unit is CD-R / -RW compatible.  
Random play function  
In CD stop mode, press the PLAY MODE button  
(10) or (30) on main unit or remote control three  
times (“RAND” displayed), then press PLAY/  
PAUSE button (13) or (35) to start random play.  
Press PLAY MODE button (10) or (30) once again  
to change normal playing mode.  
Random playing start  
Stop condition (Total track display)  
9
10  
 
PLAYING MP3 DISCS  
PROGRAMMED PLAYBACK  
2. Press CD SKIP  
/
buttons (15) or  
This CD player enables you to program up to 20 tracks in the sequence of your choice. First select CD stop  
mode.  
1.  
Press the POWER button (1) or (31) to turn on  
the unit then press the FUNCTION button (3) or  
(32) to select CD mode.  
(33) to select desired track.  
1.  
4.  
Press the PROGRAM button (16) or (34) one  
time. (“MEM” flashes)  
To continue to program, repeat steps 2 and 3  
for each selection.  
FUNCTION  
When program is full  
If there is no disc inside or disc damaged, a  
"- - -" display will appear.  
2.  
Folder 2 track 3 selected  
When there is no disc  
Reviewing programs  
Press the PROGRAM button (16) or (34)  
repeatedly. The track number programmed on  
each program number will be displayed.  
2. Press the SKIP Next or Back buttons (15) or  
(33) to select the desired track to be  
programmed.  
3. Press the PLAY/PAUSE button (13) or (35) to  
start playing.  
5.  
Press PLAY/PAUSE button (13) or (35) to play  
the programmed tracks.  
Loading a disc  
1. Press the CD Door Open button (4) to open the  
CD door.  
2.  
Put a disc inside and then close the CD door.  
After that, reading disc will start.  
Note: Ensure the disc is pushed fully and  
locked in place.  
Choose track 4  
Playing track 3 of folder 2  
Clear the program  
Press the PROGRAM button (16) or (34) to recall  
previously programmed track (“MEMORY” icon  
flashes), then press CD stop button to cancel the  
preset programs or change function mode or open  
the CD door.  
After reading disc  
To pause the MP3  
3. Press the PROGRAM button (16) or (34) one  
time, then the selected track, e.g., track 4 is  
stored.  
Press the PLAY/PAUSE button (13) or (35) while  
the disc is playing. Press it again to resume playing.  
Note: This unit is CD-R / -RW compatible.  
To play the disc  
1. Press the FOLDER UP or FOLDER DOWN  
button (5)/(6) or (28)/(36) to select desired  
folder. Total tracks of select folder will then be  
shown.  
Folder 2 selected  
Tracks of folder 2  
While paused  
11  
12  
 
Note: Once your desired mode selected, press the  
PLAY/PAUSE button (13) or (35) to start playback  
from stop mode.  
To stop the disc playing  
4. Press the PROGRAM button again, then track  
4 of folder 3 is stored.  
6. Press the PLAY/PAUSE button (13) or (35) to  
play the programmed tracks.  
Press STOP button (11) or (29).  
Stop condition (TOC display)  
Playing track 4 of folder 3  
5. Press the PLAY MODE button (10) or (30) five  
times to cancel above modes.  
PROGRAMMED PLAYBACK  
This CD player enables you to program up to 20  
tracks in the sequence of your choice. First  
select CD stop mode.  
PLAY MODE for Repeat Track/Folder and  
Random Play Operation  
1. Press the PROGRAM Button (16) or (34) one  
time.  
Note: Press the PROGRAM button  
(if programmed tracks still exist) then PLAY/  
PAUSE button, the program play will start  
again.  
1. Press the PLAY MODE button (10) or (30) once  
for current track repeat.  
5. To continue to program, repeat steps 2 to 4 for  
each selection.  
Clear the program  
Press the PROGRAM button (16) or (34) to recall  
previously programmed track (“MEMORY” icon  
flashes), then press CD stop button to cancel the  
preset programs or change function mode or open  
the CD door.  
When Program is full  
Program input mode  
2. Press the PLAY MODE button (10) or (30) twice  
for tracks in current folder repeat.  
Reviewing programs  
2. Press the FOLDER UP or FOLDER DOWN  
button (5)/(6) or (28)/(36) to select desired  
Press the PROGRAM button (16) or (34)  
repeatedly. The track number programmed on  
each program number will be displayed.  
folder.  
Choose folder 3  
3. Press the PLAY MODE button (10) or (30) three  
times for tracks in all folder repeat.  
3. Press the CD SKIP  
or  
button (15)  
or (33) to select the desired track to be  
programmed.  
4. Press the PLAY MODE button (10) or (30)  
four times for tracks in random play mode.  
(in stop mode only)  
Choose track 4 in folder 3  
13  
14  
 
TROUBLESHOOTING GUIDE  
Should this unit exhibit a problem, check the following before seeking service.  
CARE AND MAINTENANCE  
COMPACT DISC CARE  
Possible cause  
Symptom  
Solution  
Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in  
contact with the shiny, unprinted side of the disc.  
Radio  
Do not attach adhesive tape, stickers etc., to the disc label.  
Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive cleaners  
to clean the disc. If necessary, use a CD cleaning kit.  
If the disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched).  
When cleaning the disc, wipe in straight lines from the center of the disc to the edge of the disc.  
Never wipe in circular motions.  
Retune the AM (MW) or FM  
broadcast station.  
Station not tuned properly for AM  
(MW) or FM  
Noise or sound distorted on AM  
(MW) or FM broadcasts.  
FM : Antenna is not extended.  
Extend FM antenna.  
AM (MW) : Unit is not positioned  
correctly.  
Rotate unit until best reception is  
obtained.  
To remove a disc from its storage case, press down on the center of the case and lift the disc out,  
holding it carefully by the edges.  
Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft cloth.  
Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris  
so gently wiping with a soft cloth should remove most particles.  
FUNCTION Selector not set to Set FUNCTION Selector to RADIO  
AM (MW) or FM, no sound.  
RADIO position.  
position.  
Volume at minimum  
Increase Volume.  
Compact Disc Player  
CD Player will not play.  
FUNCTION selector not set to CD Set FUNCTION selector to CD  
position.  
position.  
CD is not installed or installed  
incorrectly.  
Insert CD with label side up.  
CD skips while playing.  
Disc is dirty or scratched.  
Wipe disc with cloth or use  
another disc.  
Disc inserted upside down.  
Disc is dirty.  
Insert disc properly.  
Clean disc.  
Disc is inserted but CD player  
skips over spot and will not play,  
Disc is non-standard.  
Use correct disc.  
SPECIFICATIONS  
Power Supply  
Power Output  
AC 120Volts ~ 60Hz  
DC 3V (1.5V x 2 “AA” batteries for tuner memory)  
5 W/CH 10% THD  
Dimension of Unit 200(W)x135(D)x262(H)mm  
Radio Section  
Tuning : PLL with 20 Presets (FM 10, AM 10)  
Freq. Range : AM 520 - 1710KHz, FM 87.5 - 108MHz  
CD Section  
Vertical Front Loading CD  
Speaker System  
Woofer: 4", 3.2 ohm  
Tweeter: 1 1/2"  
Remote Control  
12 Keys, Battery size "AA" x 2  
15  
16  
 

Indesit Washer IWC 6105 User Manual
InFocus Projector SP8600 User Manual
Intellinet Network Solutions Network Router Model 524490 User Manual
Intel Switch SBC 455 User Manual
JVC VCR HR J270 User Manual
JVC VCR LPT0816 001A User Manual
Karcher Pressure Washer K 570 M User Manual
Kenmore Clothes Dryer 134313400 User Manual
Kidde Smoke Alarm PI9000 User Manual
Kompernass Soldering Gun PLP 180 User Manual